
Polyplan PVC Membrane RU-P
Polyplan RU-P is a plasticized PVC-based, reinforced and UV resistant synthetic membrane. Available in 1.2, 1.5, 1.8, 2.0 mm thicknesses.
ADVANTAGES
•Resistant to solar rays, plant roots, and atmosphere conditions.
•Due to polyester equipment, it has dimensional stability together with high tearing strength and tensile strength value.
•It is easily laid out and fixed on light metal and concrete roofs by means of mechanical assembly (ligaturing).
•It is long-lasting, its application is easy and fast.
•It is resistant to water washing movement.
PLACES OF USE
•Light metal roofs
•Heat-insulated or uninsulated concrete roofs
•Dome or different geometrical shaped concrete or steel roofs
SURFACE PREPARATION
Surface on which application shall be carried out must be cleaned of any dust, dirt, rust and grease and any loose parts scraped.
APPLICATION
It is fixed to the roof by means of mechanical assembly (ligaturing). It is bonded with automatic air welding machines.
While applying PolyPlan RU-P, work clothes, protective gloves, goggles and mask must be worn, which comply with the rules of Work Safety and Labour Health.
PACKAGING
PolyPlan RU-P is launched into the market in rolls 2,2 m wide and 20 m long.
STORAGE CONDITION AND SHELFLIFE
It must be stored in sealed original packages on pallets on a clean floor away from direct sunlight. It may be stored for a long time under proper storage conditions.
BTM Bitümlü Tecrit Maddeleri Sanayi ve Ticaret A.Ş. Kemalpaşa O.S.B. Mahallesi Gazi Bulvarı No:152 35730 Kemalpaşa/İzmir TURKEY Phone:+90 232 877 04 02 Fax:+90 232 877 04 10 info@btm.co • www.btm.co
Technical documents
Technıcal Data Sheets
- PDFPolyplan PVC Membrane RU-P 120-150-180-200PDF ↓
Products in the same group

Basement and Retaining Wall
Polyplan AG is plasticized PVC-based, full black, homogenous synthetic membrane produced in compliance with EN 13967 norms. Available in 1.2, 1.5, 1.8, 2.00, 3.00 mm thicknesses. More ...

Polyplan PVC Membrane AG
Polyplan AG is plasticized PVC-based, full black, homogenous synthetic membrane produced in compliance with EN 13967 norms. Available in 1.2, 1.5, 1.8, 2.00, 3.00 mm thicknesses. More ...

Polyplan PVC Membrane UG
Polyplan UG is a plasticized PVC-based, homogenous synthetic membrane with yellow signal layer. Available in 1.2, 1.5, 1.8, 2.00, 3.00 mm thicknesses. More ...

Tunnelling
Polyplan UG is a plasticized PVC-based, homogenous synthetic Tunnelling membrane with yellow signal layer. Available in 1.5, 2.00, 3.00 mm thicknesses. More ...