
Shingle Underlayment Membrane
PLACES OF USE
SC2000 Shingle underlayment membrane, waterproofing membranes covered with oxidized bitumen, are for placing under inclined roof covering materials (shingle etc.) for additional waterproofing.
APPLICATION
It is applied by mechanical fixation method with wide-headed nails.
PACKAGING
SC2000 Shingle underlayment membrane, one surface granuled and other surface covered in a polyethylene film, are sold rolls of 15 meters by 1.0 meter. Each 27 kg/roll includes 50 gr/m2 of fiberglass base.
STORAGE CONDITION AND SHELFLIFE
BTM Shingle Underlayment Membrane should be protected from direct sunlight and stored upright in covered areas.
BTM Bitümlü Tecrit Maddeleri Sanayi ve Ticaret A.Ş. Kemalpaşa O.S.B. Mahallesi Gazi Bulvarı No:152 35730 Kemalpaşa/İzmir TURKEY Phone:+90 232 877 04 02 Fax:+90 232 877 04 10 info@btm.co • www.btm.co
Technical documents
Technıcal Data Sheets
- PDFShingle Underlayment MembraneRequest document
- PDFShingle Underlayment Membrane SC2000Request document
Declaratıon of Performance
- PDFDOP1: 13859-1 Shingle Underlayment MembranePDF ↓
Products in the same group

Poliroof SA MB Ridge Band
Poliroof SA MB, providing permanent, practical and economical solutions in details such as roof ridge, gable wall, back wall, chimney flashing and eaves plate covering, is covered by coloured shingle granules and has pol

Shingle Nails
All nails with wide nailheads are galvanized. More ...

Shingle Roof Vents
Humidity shortens the life of your roof. To prevent humid air from being trapped, a good ventilation is required for every roof. In the ventilation system, the air must enter from the gutters and exit from the roof surfa

BTM Elastopast
ELASTOPAST is a cold applied elastomeric bitumen mastic, joint sealant and adhesive for waterproofing, adhering, sealing leaks and making repairs. More ...