BTM Elastobit
Detaliile Produsului
BTM Elastobit is a fiberglass or polyester felt reinforced waterproofing membrane made of bitumen modified by SBS (styrene-butadiene-styrene), resistant to plant roots, the lower surface is coated with PE (polyethylene) film and the upper surface is coated with PE (polyethylene) film or colored granules, having a high elasticity, applied with an oxyacetylene burner or hot asphalt.
Caracteristici
It has the superior flexibility and cold performance of bitumen with SBS. It can be bonded with torch or hot asphalt.
UNDERLAY:
| Membranes | Roll Dimensions |
°C |
Reinforcement |
| CE 3 | 1x10 m | -20 | Fiberglass |
| CE 3 Sanded | 1x10 m | -20 | Fiberglass |
| PE 3 | 1x10 m | -20 | Polyester |
| PE 3 Sanded | 1x10 m | -20 | Polyester |
(Coated with PE (polyethylene) film or sand)
CAPSHEET:
| Membranes | Roll Dimensions | °C | Reinforcement |
| PE3 | 1x8 m | -20 | Polyester |
| 1x10 m | -20 | Polyester |
(Coated with colored granules)
Available Colors:Slated,Black,Red and Green
Utilizări
Used to obtain water and moisture impermeability on:
- terrace roofs of buildings,
- sloping concrete roofs,
- curtain walls, foundations.
- May be used as bottom layer insulation membrane on light metallic and prefabricated roofs.
- It is not only designed for cold climates but may also be used as lower and middle layer membrane in waterproofing to be made on any surfaces which contact any types of soil and require elasticity.
- It is used in the insulation of pressurized and non-pressurized underground or surface waters.
Formular De Contact
Ne puteti contacta pentru întrebările dumneavoastră.