
Bituproof Protector
ADVANTAGES
- Does not require protection concrete
- Creates a cost advantage thanks to excavation, time and labor savings
- Provides excellent waterproofing with both chemical and mechanical adhesion properties.
- It allows to detect the problems that may occur in the insulation in the future from the interior.
- It is easily applied with a torch and does not need additional elements in the corners.
- Thanks to its bituminous content, it allows the problems that may occur after the application to be repaired quickly and easily.
- Resistant to chemicals in the soil
PLACES OF USE
- Foundations
- Foundation tanking systems
SURFACE PREPARATION
The surface should be cleaned from dust, dirt,rust and oil, loose pieces should be scraped off.
APPLICATION
BTM BituProof Protector is laid on the foundation bed with staggering after removing the silicon release film on the bottom surface and the overlaps are torched on. Rebars can directly be placed on top of Bituproof Protector and when concrete is poured and setting it creates perfect bond that no water can seep through.
PACKAGING
It is 1 m wide and 15 m long and is launched to the market in rolls.
STORAGE CONDITION AND SHELFLIFE
The membrane rolls should be stored vertically under a roof, protected from direct sunlight. If the rolls have to be stored outdoors for a long period of time, they must be covered with a protective layer in order to protect them from the sunlight. The membrane rolls or pallets should not be stacked on each other.
Shelf-life is one year from the production date in case it is stored in its sealed and undamaged package in dry ambient conditions at a temperature from +5°C to +25°C away from direct sunlight.
BTM Bitümlü Tecrit Maddeleri Sanayi ve Ticaret A.Ş. Kemalpaşa O.S.B. Mahallesi Gazi Bulvarı No:152 35730 Kemalpaşa/İzmir TURKEY Phone:+90 232 877 04 02 Fax:+90 232 877 04 10 info@btm.co • www.btm.co
Products in the same group

Bituproof Y Horizontal
BTM BituProof Y, first layer membrane used on the foundation bed of system (under the raft), is a superior quality membrane with reinforced elastomeric modified bitumen and high strength special polyester reinforcement s

Bituproof Y Plus
BTM BituProof Y Plus is a superior membrane being SBS-additive, elastomeric modified bituminous, having high strength, double layered special polyester reinforcement, laps of which are torched. More ...

Bituproof D Vertical
BTM BituProof D, being one of the elements forming the system, may be applied easily in the most challenging conditions such as blind side waterproofing, because it combines the state-of-the-art techniques of modified bi