
Bituproof Y Horizontal
ADVANTAGES
- It is applied as a single layer.
- Does not require protection concrete, saves time and cost.
- Thanks to its high-strength special polyester felt reinforcement , it is resistant to hydrostatic pressure, punctures and tears.
- It minimizes workmanship errors thanks to its self-adhesive and torch-adhesive joint.
- Thanks to its full adhesion to the concrete surface, it prevents the horizontal movement of water.
PLACES OF USE
- Foundations
- Foundation tanking systems
SURFACE PREPARATION
It is recommended to use formwork removal lubricants with Bituproof tanking system.
The surface of the rubble concrete poured in sufficient thickness and strength must be surfaced. There should be no loose aggregate and sharp protrusions on the surface. The floor should be cleaned by sweeping before application.
APPLICATION
After completing the rubble concrete poured on the foundation base with sufficient thickness and strength, the overlaps (joints) of Bituproof Y must be heated and adhered with a torch. Long side overlaps should be 10 cm, short side overlaps of 1 meter should be at least 15 cm. It should be applied by staggering 30 cm so that the long side overlaps do not come together.
PACKAGING
Bituproof Y is launched into the market in rolls 1 m wide and 8 m long.
STORAGE CONDITION AND SHELFLIFE
The membrane rolls should be stored vertically under a roof, protected from direct sunlight. If the rolls have to be stored outdoors for a long period of time, they must be covered with a protective layer in order to protect them from the sunlight.The membrane rolls or pallets should not be stacked on each other.
It should be stored in its sealed and undamaged package in dry ambient conditions at a temperature from +5°C to +25°C away from direct sunlight.
BTM Bitümlü Tecrit Maddeleri Sanayi ve Ticaret A.Ş. Kemalpaşa O.S.B. Mahallesi Gazi Bulvarı No:152 35730 Kemalpaşa/İzmir TURKEY Phone:+90 232 877 04 02 Fax:+90 232 877 04 10 info@btm.co • www.btm.co
Technical documents
Technıcal Data Sheets
- PDFBituproof Y Horizontal 3.5Request document
- PDFBituproof Y Horizontal 4.5Request document
Declaratıon of Performance
- PDFDOP1/5: 13969 Bituproof Y-D-PPDF ↓
Qualıty Certıfıcates
- PDFCE Certificate 13969Request document
Products in the same group

Bituproof Y Plus
BTM BituProof Y Plus is a superior membrane being SBS-additive, elastomeric modified bituminous, having high strength, double layered special polyester reinforcement, laps of which are torched. More ...

Bituproof D Vertical
BTM BituProof D, being one of the elements forming the system, may be applied easily in the most challenging conditions such as blind side waterproofing, because it combines the state-of-the-art techniques of modified bi

Bituproof Protector
BTM BituProof Protector is fitted with a special mineral on upper surface that adheres perfectly on fresh poured concrete and ensuring full waterproofing between the concrete and membrane. The underside is provided with